COLD WELL:

The CWB-01 cold well was first developed as an AHP-1200CPV custom accessory for the petrochemical industry. It replaced the need to maintain ice baths for the storage of chemicals. It has the advantage of good temperature control in either heating or cooling modes.

The temperature of the cold plate can be referenced to the fluid temperature or the remote sensibility feature of the CPV can be used to control based on the actual fluid temperatures.

COOLING ASPHALT SAMPLES:

An oil refinery runs tests on asphalt samples at different temperatures. TECA Model AHP-301CPV
Cold Plate is currently being used during the course of the customer's testing. The customer says, “We have used this unit at different temperatures, and it has performed well. Thank you for your follow-up on the performance of this device.”

CHEMICAL WASTE TRANSPORT:

Here’s an application that our engineering crew would love to put into greater use if they could figure out where and how.

A specialty gas company called. They wanted to transfer toxic and corrosive liquids from big to small containers for lab use. The process had been taking several minutes with too much wasted product. They knew because of the conditions a natural head pressure in the big container that they could use a cold plate to cool at the receiving vessel (1.5 dia x 12" bottle) to create a driving force which moves the fluid. We didn’t go into the physics of this, we trusted what the customer said and worked with them. When they tried an AHP-1200CP it was fantastic. It turned 4 minutes and a lot of waste into no waste and 40 seconds.