Thermoelectric Cold Plate Applications

CONDENSATION TEST:

cold plate

 

A company that offers a broad range of door and window components and related building products with proven product lines and a multi-state collection of modern manufacturing facilities uses the AHP-150CP in a Canadian Fog Box, for testing double pane windows for condensation.

 

QUALITY CONTROL:

The AHP-1200CPV is used in a customer's Quality Control inspection process. The customer required a specific piece of equipment that would allow for bench top inspection of solution samples contained in small vials. Maintaining a 5C temperature throughout the QC inspection process was crucial. Ease of use and dependable control by TECA Model AHP-1200CPV Cold Plate has made the customer's process more efficient.

 
 

VACUUM CHAMBER:

thermoelectric cold plate

Some engineers at Lucent wanted to cool devices inside a vacuum chamber and they didn’t want to reinvent the wheel. TECA’s been making devices like that for decades. They had a load of 10 to 20 watts generated and wanted -40C with about 15 to 20 C water available. A Custom LHP-800CP/300CP cascade, controller and power supply were supplied for a reasonable cost in a reasonable time frame.

 

ENVIRONMENTAL CONTROL:

A municipal waste plant had an emergency requirement for a water drop device (to condense moisture for analysis) to be installed in a smokestack.

peltier cold plate

In this time critical application TECA responded with a custom designed variation of the AHP-150CP thermoelectric cold plate, to be mounted high up in the stack. Working with the customer TECA was able to design and deliver the product in less than two weeks, more than meeting the customer’s timetable.

 

ELECTRONIC TEST STATION:

An aerospace contractor was interested in a large cold plate for the testing of electronic components. We first offered them the AHP-1200CPV but they responded that the AHP-1200DCP was more the size they wanted. Could we change it to a single plate? Well we couldn’t change the plate size but we could add an accessory plate which was larger. And we could build the unit with one controller including all of the standard options.

peltier cooler

Now they are using the 12” x 18” custom accessory plate and a special AHP-1200DCP to test electronic amplifiers by ramping the temperature up and down between +10 to +70. A custom solution at very nearly standard product price to fill a not so unusual need.

 
     
   
Catalog Sizing Software | Manuals | Applications Site Map | Privacy Policy | Testimonials Contact
© 2014 ThermoElectric Cooling America Corporation. All Rights Reserved.