|
|
|
|
|
|
|
|
|
|
Accessories For Temperature Controllers
|
|
Single Relay Pack (cool only applications)
Switching Voltage: 120/240 VAC, 0-100 VDC
Includes: Heat sink and wiring harness |
Click on the part numbers to request a quick quote
PART # |
FUNCTION |
DRIVE SIGNAL |
SWITCHING VOLTAGE |
SWITCHING CURRENT |
RELAY-B |
cool only |
3-32 VDC |
120/240 VAC |
10 AMPS |
RELAY-C |
cool only |
3-32 VDC |
0-100 VDC |
12 AMPS |
RELAY-D |
cool only |
3-32 VDC |
0-100 VDC |
20 AMPS |
RELAY-E |
cool only |
3-32 VDC |
0-100 VDC |
40 AMPS |
RELAY-T |
cool only |
120 VAC |
120/240 VAC |
10 AMPS |
Click on the image to open the PDF file
|
|
|
Dual Relay Pack (heat and cool applications)
Switching Voltage: 120/240 VAC, 0-100 VDC
Includes: Heat sink and wiring harness |
Click on the part numbers to request a quick quote
PART # |
FUNCTION |
DRIVE SIGNAL |
SWITCHING VOLTAGE |
SWITCHING CURRENT |
RELAY-F |
heat & cool |
3-32 VDC |
0-100 VDC |
12 AMPS |
RELAY-G |
heat & cool |
3-32 VDC |
0-100 VDC |
20 AMPS |
RELAY-H |
heat & cool |
3-32 VDC |
0-100 VDC |
40 AMPS |
RELAY-I |
heat & cool |
3-32 VDC |
cool: 0-100 VDC heat: 120/240 VAC |
cool: 12 AMPS heat: 10 AMPS |
RELAY-J |
heat & cool |
3-32 VDC |
cool: 0-100 VDC heat: 120/240 VAC |
cool: 20 AMPS heat: 10 AMPS |
RELAY-K |
heat & cool |
3-32 VDC |
cool: 0-100 VDC heat: 120/240 VAC |
cool: 40 AMPS heat: 10 AMPS |
RELAY-L |
heat & cool |
3-32 VDC |
cool: 120/240 VAC; heat: 0-100 VDC |
cool: 10 AMPS heat: 12 AMPS |
RELAY-M |
heat & cool |
3-32 VDC |
cool: 120/240 VAC; heat: 0-100 VDC |
cool: 10 AMPS heat: 20 AMPS |
RELAY-N |
heat & cool |
3-32 VDC |
cool: 120/240 VAC; heat: 0-100 VDC |
cool: 10 AMPS heat: 40 AMPS |
RELAY-R |
heat & cool |
3-32 VDC |
120/240 VAC |
10 AMPS |
Click on the image to open the PDF file
|
|
|
Quad Relay Pack (heat/cool via reverse polarity)
Switching Voltage: 0-100 VDC
Includes: Heat sink and wiring harness |
Click on the part numbers to request a quick quote
PART # |
FUNCTION |
DRIVE SIGNAL |
SWITCHING VOLTAGE |
SWITCHING CURRENT |
RELAY-O |
heat/cool via reverse polarity |
3-32 VDC |
0-100 VDC |
12 AMPS |
RELAY-P |
heat & cool via reverse polarity |
3-32 VDC |
0-100 VDC |
20 AMPS |
RELAY-Q |
heat & cool via reverse polarity |
3-32 VDC |
0-100 VDC |
40 AMPS |
Click on the image to open the PDF file
|
|
|
RTD-Probe
Sensor Type: Three wire RTD, 100 Ω with connector
Length: 6' Minumum
Probe Size: 1/8 DIA X 6" long |
Click on the image for larger view
|
|
|
RTD-Ring
Sensor Type: Three wire RTD, 100 Ω with connector
Length: 6' Minumum
Mounting Style: Surface Mount |
Click on the image for larger view
|
|
|
Thermocouple-Ring
Sensor Type: "T" Type Thermocouple with connector
Length: 6' Minimum
Mounting Style: Surface Mount |
Click on the image for larger view
|
|
|
C-USB
Function: USB to RS-232 converter (DB9 male) powered by USB port
Cable Length: 4"
Inculeds: Driver CD included
Supports: Windows, MAC, Linux |
· Special high gloss white finish enclosure design
· Looks and works great with MAC, PC and Linux platforms
· Enhanced RS232 transciever gives serial port speed of up to 1000K bps
· Adds one RS-232 serial port by connecting to USB port
· Installed as standard Windows COM port
· FIFO: 128 byte transmit buffer 384 byte receive buffer
· Works with USB 1.1 & 2.0 host port
· One DB9 male connector
· Serial Communication Parameters
· Parity: None, Even, Odd
· Data bits: 7, 8
· Flow control: RTS/CTS , DSR/DTR, X-ON/ X-OFF, None
· Gold plated USB and DB9 connectors for enhanced connection reliability
· Side-lit blue RX and TX traffic indicators
· integral 10cm USB cable with moulded strain relief
· Quality 4-layer pcb design
· COM Port Number assignment is configurable
· Uses latest FTDI "R" type chip set & drivers for maximum compatibility
· Compatible drivers for all current Windows, Mac and Linux operating systems.
· Full RS-232 modem control signals
· RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
· Powered by USB port. No external power adapter required.
|
|
|
C-485/232
Function: Bi directional RS-232 to RS-485 |
The C-485/232 is an industrial grade (wide temperature range with surge & static protection) port-powered
bi-directional RS-232 to RS-485 converter, which can be used to convert any standard RS-232C port into a two-wire RS-485 port and vice versa.
The unit is powered from the RS-232 data line; it also supports data direction auto-turnaround. Therefore, no external power or flow control is required. |
FEATURES
• Industrial grade with wide temperature range, surge and static protection.
• Port-powered, no external power or RTS, DTR required.
• Plug and play (hot-pluggable, data format auto-sensing and self-adjusting).
• Data direction auto-turnaround, no flow control is required.
• Built-in surge protection, static protection and circuit protection.
• Built-in 1201 end-of-line terminator for easy installation.
• Surface Mount Technology manufactured to ISO-9001 standards.
• CE certified.
INSTALLATION NOTES
• Connect PC’s (or other DTE device’s) COM port (or use a straight-through cable) to the RS-232 side of C-485/232, use a cross-over (Null-Modem) cable for DCE device.
• The 1201 end-of-line terminator adds heavy DC loading to a system; connect it only when the RS-485’s distance is over 660ft (200m).
• If C-485/232 is connected to any outdoor devices, please ensure that proper lightning protection is employed to prevent your devices from being damaged by lightning strikes.
|
|
|
C-RS232
Function: RS-232 M/F extension cable
Cable Length: 10 ft
Connectors: DB9 Male to DB9 Female
Note: All lines are wired straight through |
|
|
|
|
|
|
|
|
|
|