TECA Corp.
4048 W. Schubert
Chicago, IL 60639
T: (773) 342-4900
T: (888) 832-2872
F: (773) 342-0191

Air Cooled Thermoelectric Cold Plates For Laboratory
The cold plates on this page are designed to cool and heat, through direct contact, laboratory samples or other loads. Reaching temperatures as cold as -50C is possible with the Cascade system. RS-232 and other features are included... read more ►

 
  • AHP-1800CPV
  • Quote
  • Picture
  • Curves
  • Drawing
  • Solid Models
  • Literature
  • Applications
  • Accessories
peltier cold plate

AHP-1800CPV Series
Style: Bench Top
Voltages: 100 - 240 VAC

Environments:
Bench Top
Laboratory
Industrial

Cooling capacity:
400 - 430 Watts @ 0 °C ΔT

Includes:
Integral Power Supply
Integral Temperature control
RS-232 Communications
Remote Sensibility


Accessories available for AHP-1800CPV series thermoelectric cold plates:

peltier cool

 

  • AHP-1200DCP
  • Quote
  • Picture
  • Curves
  • Drawing
  • Solid Models
  • Literature
  • Applications
  • Accessories
dual cold plate

AHP-1200DCP Series
Dual Temperature Zone Plate

Style: Bench Top
Voltages: 100-240 VAC

Environments:
Bench Top
Laboratory
Industrial

Cooling capacity:
400 - 480 Watts @ 0 °C ΔT (combined)
200 - 250 Watts @ 0 °C ΔT (individual plate)

Includes:
Integral Power Supply
Integral Temperature controls
RS-232 Communications
Remote Sensibility


 
 
  • AHP-1200CPV
  • Quote
  • Picture
  • Curves
  • Drawing
  • Solid Models
  • Literature
  • Applications
  • Accessories
peltier cold plate

AHP-1200CPV Series
Style: Bench Top
Voltages: 100 - 240 VAC, 24 VDC

Cold Plate Temperature Range:
-20 °C to 90 °C

Environments:
Bench Top
Laboratory
Industrial

Cooling capacity:
200 - 250 Watts @ 0 °C ΔT

Includes:
Integral Power Supply
Integral Temperature control
RS-232 Communications
Remote Sensibility


Accessories available for AHP-1200CPV series thermoelectric cold plates:

peltier cool
 
  • AHP-1200CPV
  • Quote
  • Picture
  • Curves
  • Drawing
  • Solid Models
  • Literature
  • Applications
  • Accessories
peltier cold plate

AHP-1200CPV High Temp. Series
Style: Bench Top
Voltages: 100 - 240 VAC, 24 VDC

Cold Plate Temperature Range:
-20 °C to 120 °C

Environments:
Bench Top
Laboratory
Industrial

Cooling capacity:
250 Watts @ 0 °C ΔT

Includes:
Integral Power Supply
Integral Temperature control
RS-232 Communications
Remote Sensibility


Accessories available for AHP-1200CPV series thermoelectric cold plates:

peltier cool
  • TGB-5030
  • Quote Request
  • Picture
  • Curves
  • Drawing
  • Literature
thermal gradient bar TGB-5030 Thermal Gradient Bar

Gradient Area:
500 X 300 mm
Material: ALuminum, clear anodized
Embeded Sensor: 3 Wire RTD, 100 ohm

TECAs TGB-5030 Gradient Bar option expands the use of the AHP-1200CPV line of Cold Plates. With TECA model AHP-1200CPV cold plate at each end the gradient bar has programmable gradient areas with near linear gradients between the two ends and near uniform temperatures along the width of the bar. The temperature at each end of the gradient area can be programmed to a single set point or with a ramp/step and soak profile creating constant, expanding, contracting or moving gradients. Set the gradient profile to be large for initial observations then adjust the end set points to zoom in on a temperature range of interest. The temperature at the end of the gradient area is measured from underneath the plate at approximately .05 from the surface leaving the top gradient area clean and smooth. Optional external surface sensors can be used to change the size of the gradient area.

Accessories available for AHP-1200CPV series thermoelectric cold plates:

peltier cool
  • AHP-1200CAS
  • Quote
  • Picture
  • Curves
  • Drawing
  • Solid Models
  • Literature
  • Applications
  • Accessories
peltier cold plate

AHP-1200CAS Series
Style: Bench Top
Voltages: 100 - 240 VAC, 24 VDC

Cold Plate Temperature Range:
-50 °C to 90 °C

Environments:
Bench Top
Laboratory
Industrial

Maximum ΔT @ 0 Watts Load:
-45 °C for AHP-1200CAS
-59 °C for AHP-1200C22
-68 °C for AHP-1200C21
-76 °C for AHP-1200C31
Referenced 25 °C operating ambient

Includes:
Integral Power Supply
Integral Temperature control
RS-232 Communications
Remote Sensibility


Accessories available for AHP-1200CAS series thermoelectric cold plates:

peltier cool
 
  • AHP-1200CAS
  • Quote
  • Picture
  • Curves
  • Drawing
  • Solid Models
  • Literature
  • Applications
  • Accessories
peltier cold plate

AHP-1200CAS High Temp. Series
Style: Bench Top
Voltages: 100 - 240 VAC, 24 VDC

Cold Plate Temperature Range:
-50 °C to 150 °C

Environments:
Bench Top
Laboratory
Industrial

Maximum ΔT @ 0 Watts Load:
-45 °C for AHP-1200CAS
-59 °C for AHP-1200C22
-68 °C for AHP-1200C21
-76 °C for AHP-1200C31
Referenced 25 °C operating ambient

Includes:
Integral Power Supply
Integral Temperature control
RS-232 Communications
Remote Sensibility


Accessories available for AHP-1200CAS series thermoelectric cold plates:

peltier cool
 
  • AHP-301CPV
  • Quote
  • Picture
  • Curves
  • Drawing
  • Solid Models
  • Literature
  • Applications
  • Accessories
TE cold plate

AHP-301CPV Series
Style: Bench Top
Voltages: 100 - 240 VAC, 24 VDC

Cold Plate Temperature Range:
-15 °C to 90 °C

Environments:
Bench Top
Laboratory
Industrial

Cooling capacity:
85 Watts @ 0 °C ΔT

Includes:
Integral Power Supply
Integral Temperature control
RS-232 Communications
Remote Sensibility


Accessories for use with AHP-301CPV thermoelectric cold plate: TE cold plates
 
  • AHP-301CPV
  • Quote
  • Picture
  • Curves
  • Drawing
  • Solid Models
  • Literature
  • Applications
  • Accessories
TE cold plate

AHP-301CPV High Temp. Series
Style: Bench Top
Voltages: 100 - 240 VAC, 24 VDC

Cold Plate Temperature Range:
-15 °C to 120 °C

Environments:
Bench Top
Laboratory
Industrial

Cooling capacity:
85 Watts @ 0 °C ΔT

Includes:
Integral Power Supply
Integral Temperature control
RS-232 Communications
Remote Sensibility

  • TGB-2515
  • Quote Request
  • Picture
  • Curves
  • Drawing
  • Literature
thermal gradient bar TGB-2515 Thermal Gradient Bar

Gradient Area:
250 X 150 mm
Material: ALuminum, clear anodized
Embeded Sensor: 3 Wire RTD, 100 ohm
TECA’s TGB-2515 Gradient Bar option expands the use of the AHP-301CPV line of Cold Plates. With a TECA model AHP-301CPV cold plate at each end the gradient bar has programmable gradient areas with near linear gradients between the two ends and near uniform temperatures along the width of the bar. The temperature at each end of the gradient area can be programmed to a single set point or with a ramp/step and soak profile creating constant, expanding, contracting or moving gradients. Set the gradient profile to be large for initial observations then adjust the end set points to zoom in on a temperature range of interest. The temperature at the end of the gradient area is measured from underneath the plate at approximately .05 from the surface leaving the top gradient area clean and smooth. Optional external surface sensors can be used to change the size of the gradient area.

Click on the image for larger view
thermal gradient

Picture shows TGB-2515 Thermal Gradient Bar used with two AHP-301CPV

Click on the image for a larger view of the performance curve
thermal gradient plate

CLick on the image for larger viewgradient bar

Click on the image to open the PDF file
gradient bar

 

 
 
  • AHP-800MSP
  • Quote
  • Picture
  • Curves
  • Drawing
  • Solid Models
  • Literature
  • Applications
  • Accessories
AHP-800MSP

AHP-800MSP Magnetic Stirring Plate
Style: Bench Top
Voltages: 100-240 VAC

Environments:
Bench Top
Laboratory
Industrial

Applications:
Laboratory or industrial environments, drugs and industrial chemicals. Process testing. Quality control.

Includes:
Integral Power Supply
Integral Temperature control
RS-232 Communications
Remote Sensibility
Stock cold shoe for 4 Liter Corning Pyrex Brand 1000 Beakers

 


 
  • CCP-22
  • Quote
  • Picture
  • Curves
  • Installation
  • Solid Models
  • Literature
  • Applications
  • Accessories
CCP-22

CCP-22 Cascade Cold Plate
Description: Low Temperature Cascade
Voltages: 24 VDC

Cascade Temperature Range:
-30 °C to 90 °C

Requirement:
AHP-1200CPV for Cascades
Part Number: 9-35EB-1-CAS

Applications:
Laboratory or industrial environments, drugs and industrial chemicals. Process testing. Quality control.

Includes:
Internal RTD Sensor



  • CCP-22H
  • Quote
  • Picture
  • Curves
  • Installation
  • Solid Models
  • Literature
  • Applications
  • Accessories
CCP-22

CCP-22H High Temp. Cascade Cold Plate
Description: Extended Temperature Cascade
Voltages: 24 VDC

Cascade Temperature Range:
-30 °C to 150 °C

Requirement:
AHP-1200CPV for Cascades
Part Number: 9-35EB-6-CAS

Applications:
Laboratory or industrial environments, drugs and industrial chemicals. Process testing. Quality control.

Includes:
Internal RTD Sensor


 
 
 
  • CCP-21
  • Quote
  • Picture
  • Curves
  • Installation
  • Solid Models
  • Literature
  • Applications
  • Accessories
CCP-21

CCP-21 Cascade Cold Plate
Description: Low Temperature Cascade
Voltages: 24 VDC

Cascade Temperature Range:
-40 °C to 90 °C

Requirement:
AHP-1200CPV for Cascades
Part Number: 9-35EB-1-CAS

Applications:
Laboratory or industrial environments, drugs and industrial chemicals. Process testing. Quality control.

Includes:
Internal RTD Sensor


 

  • CCP-21H
  • Quote
  • Picture
  • Curves
  • Installation
  • Solid Models
  • Literature
  • Applications
  • Accessories
CCP-21

CCP-21H High Temp. Cascade Cold Plate
Description: Extended Temperature Cascade
Voltages: 24 VDC

Cascade Temperature Range:
-40 °C to 150 °C

Requirement:
AHP-1200CPV for Cascades
Part Number: 9-35EB-6-CAS

Applications:
Laboratory or industrial environments, drugs and industrial chemicals. Process testing. Quality control.

Includes:
Internal RTD Sensor


 
 
 
  • CCP-31
  • Quote
  • Picture
  • Curves
  • Installation
  • Solid Models
  • Literature
  • Applications
  • Accessories
CCP-31

CCP-31 Cascade Cold Plate
Description: Low Temperature Cascade
Voltages: 24 VDC & 12 VDC

Cascade Temperature Range:
-50 °C to 90 °C

Requirement:
AHP-1200CPV for Cascades
Part Number: 9-35EB-1-CAS

Applications:
Laboratory or industrial environments, drugs and industrial chemicals. Process testing. Quality control.

Includes:
Internal RTD Sensor


 

  • CCP-31H
  • Quote
  • Picture
  • Curves
  • Installation
  • Solid Models
  • Literature
  • Applications
  • Accessories
CCP-31

CCP-31H High Temp. Cascade Cold Plate
Description: Extended Temperature Cascade
Voltages: 24 VDC & 12 VDC

Cascade Temperature Range:
-50 °C to 150 °C

Requirement:
AHP-1200CPV for Cascades
Part Number: 9-35EB-6-CAS

Applications:
Laboratory or industrial environments, drugs and industrial chemicals. Process testing. Quality control.

Includes:
Internal RTD Sensor


 
 

TECA's thermoelectric (Peltier) Air-Cooled Laboratory Cold/Hot Plates are perfect for use in laboratories or anywhere solid-state cooling or heating surfaces are needed. Applications include cooling and heating lab samples, tissue dissection (histology), quality control, pharmaceuticals, research, pain studies (thermal nociception) and more. Notably, the AHP-301CPV and AHP-1200DCP models have been used in published research articles (see 50 Years of Innovation section on this website for details, 2005 and 2009-2011).

Each thermoelectric Cold/Hot plate on this page include versatile features such as: integral programmable temperature controller, data logging software, RS-232 communications, integral RTD sensor, ability to switch to exterior sensor, and more.

Cold/Hot Plate surfaces can be smooth or include tapped accessory holes at no extra charge (see drawing). Accessories are available to help you further customize the plate to your application.

Almost every model has a high temperature version available for applications requiring heating above 90C.

Single Cold/Hot Plates include the thermoelectric AHP-301CPV and AHP-1200CPV. We also offer a Dual Cold/Hot Plate, the thermoelectric AHP-1200DCP. This unique Peltier product is intended primarily for pain research and behavior studies using lab animals. However, this product has been customized for other uses including large sample cooling and heating. Also of note, Cascade Cold Plate systems allow for cooling to temperatures as low as -50C.


 

Catalog | Sizing Software | Manuals | Applications | Site Map | Privacy Policy | Testimonials | Contact
© 2010 Thermoelectric Cooling America Corporation. All Rights Reserved.