The AHP-1200CPV is used in a customer’s Quality Control inspection process. The customer required a specific piece of equipment that would allow for bench top inspection of solution samples contained in small vials. Maintaining a 5C temperature throughout the QC inspection process was crucial.
Ease of use and dependable control by TECA Model AHP-1200CPV Cold Plate has made the customer’s process more efficient.
A company specializing in hydrogen fuel cell technology required fast cooling of a fixture. The fixture is bonding multiple thin materials and can be heated up to 100 °C. The fixture needed to be cooled to the point where it could be handled by technicians—within a 5 minute time frame. Using two AHP-1200CP Cold Plates from TECA, the customer has created a system where a heat sink is cooled on one AHP-1200CP Cold Plate while a hot fixture is sandwiched between a second AHP-1200CP Cold Plate and a pre-cooled heat sink.
The customer reports being very happy with the TECA Cold Plates—the system is cooling in about 4 minutes! The AHP-1200CP Cold Plate is an economical, easy to use product when maximum cooling is required, without a temperature controller. 120 VAC, 240 VAC and 24 VDC versions are available.
Portable medicine cooler needed for carrying emergency intravenous solutions, all components must be enclosed within the case. TECA designed a custom thermoelectric (peltier) based cold plate built into a Pelican™ Box.
TECA is developing this product for a new customer. We have taken a standard Pelican™ Box and configured a battery powered thermoelectric cooling system which is installed totally inside. This cooled box is for the purpose of transporting up to 4 liters of emergency intravenous solutions safely.
There are fitted compartments inside as well for transporting other necessary items for patient care. Since nothing is exposed or protruding from the box, our customer has ended up with a good looking and very rugged, functional thermoelectric product.
The beverage cooler application challenge was to keep concentrated beverage container located next to a hot water tank cool in a high volume OEM application. TECA has the flexibility and resources to manufacture custom OEM thermoelectric cooler (peltier coolers) assemblies intended for use as part of a customer machine, apparatus, or system. This OEM assembly is made by TECA in production runs in the thousands. It is not ours, so to protect the privacy and identity of our customers we can’t give too many details here.
This assembly is part of a beverage service product which is shipped worldwide by a well known consumer products company. TECA furnishes the cooling “engine” which refrigerates the beverage product to be dispensed, and the OEM builds finished machinery in their own plants.