Cosmetics Manufacturing

Custom, consumer-created lipstick:

TECA Cold Plate Model AHP-301CPV is utilized by an international beauty company. A fun novelty for shoppers, the customer can create their own custom shade of lipstick. The process takes minutes and is done right at the retail counter. TECA’s cold plate AHP-301CPV is the ideal place to quickly cool and solidify the lipstick. The AHP-301CPV is part of our growing Laboratory Cold Plate product family.

consumer created lipstick  cold plate cooling lipstick mold

These products offer incredible versatility in function and ability to customize. Serving laboratories (and make-up counters!) all over the world, these products accept 100-240 VAC input and come with a sophisticated temperature controller communications software. Contact us and tell us what you need. Whether it is remote sensing, whisper-quiet operation, or extreme temperature set points, we can advise you on the best solution.

PH 773.342.4900
teca@thermoelectric.com

Another Day, Another “A”

Thermoelectric Cold/Hot Plate Replaces Liquid Nitrogen:

TECA’s cold/hot plates utilize thermoelectric cooling, a solid-state method of heat transfer. Also called the Peltier Effect, this technology is valued for its reliability and lack of maintenance needs. For over a decade, TECA cold/hot plates have been cited in peer-reviewed, published academic research papers. Pictured here is our youngest known researcher, a 7th grade student who designed a physics experiment for her school science fair. TECA could not pass up the opportunity to support a budding scientist and lent our Model AHP-301CPV, free of charge.

thermoelectric cold plate

Lisa, a 7th grader, used the AHP-301CPV in her science fair project, Electric Ice. Following the methods from a paper published in the journal Science, she obtained pyroelectric crystals, which develop an electric field in response to a temperature change. When the pyroelectric crystals are cooled in a controlled manner, their electric field affects the freezing point of the moisture in the air that condenses on them.

Unlike the scientists in the Science paper, Lisa did not have access to large amounts of liquid nitrogen to provide the cooling. Enter TECA Model AHP-301CPV Cold/Hot Plate. The pyroelectric crystals, housed in copper cups, were placed on the cold plate surface. Using the AHP-301CPV’s integral temperature controller and included communications software, Lisa programmed the cooling to ramp down by 2°C per minute, from room temperature to -20°C. A video camera recorded the condensation of the ambient moisture and its subsequent freezing. By comparing the time base of the video with the data captured by the AHP-301CPV’s communications software, Lisa was able to measure the freezing temperature for 3 separate configurations: within a positive electric field, a negative field, and no electric field.

Read moreAnother Day, Another “A”

Controlled Temperature Cycling in a Research Lab

Direct contact cooling 65°C below ambient:

controlled temperature cyclingA large state university in the U.S. has been using a collection of several TECA Model AHP-1200CAS Cascaded Cold/Hot Plates for years, to perform various research on the characteristics of cement paste samples.

In a cascaded system, the thermoelectric element acts as a heat sink for the element above it. Therefore, the more “stages” there are, the colder the top-most stage becomes. The research team which provided this photo successfully ran temperature profiles such as: from -20° to +24°C, and +23° down to -40°. This consistent accuracy and reliability of TECA Cold/Hot Plate products are a smart addition to any lab needing plug-and-play benchtop cooling or heating.

All Laboratory-Style TECA Cold/Hot Plates include an integral temperature controller and tecaLOG communications software. Versatile accessories are available such as cutting surfaces for grossing, barriers for lab animals, and more. The possibilities are endless. Please reach out to us for help selecting the right TECA solution for your lab. Ph 773.342.4900.

Museum Exhibit, Thermoelectric Cold Plate

Educational use for thermoelectric cooling cold plate:

A large children’s science and technology center in the Midwest, specializing in hands-on exhibits, has been using multiple TECA Cold/Hot Plates, Model AHP-1200CPV. The AHP-1200CPV supports part of an exhibit teaching children about insulation. The built-in temperature controller and attractive, ergonomic exterior are perfect for the museum’s display.

Thermoelectric Cold Plate  thermoelectric cooling thermoelectric cooling

Read moreMuseum Exhibit, Thermoelectric Cold Plate

Where Are All the Cold Plates?

Cooling micro-organisms in a lab:

Recently, a prestigious U.S. university’s research lab contacted TECA. The team needed to cool a 340-well micro plate. Their vendors had many hot plates to offer, but no one seemed to offer a like product for cooling. The lab team was happy to discover TECA products online and the AHP-301CPV proved to be the right fit.

The lab’s 340-well plate is filled with a solution housing micro-organisms. To get the organisms to migrate to the bottom of the wells, the lab needed controlled cooling to 0degC. However, there is a limited temperature range in which the organisms do not degrade so precise control was paramount.

Cooling micro-organisms. Cold Plates

Read moreWhere Are All the Cold Plates?

Freeze Tape Casting

Freeze Tape Casting Manufacturer:

A materials science company specializes in creating foams with specific porosity for use in electric vehicles, batteries, thermal interface materials and ceramic-metal interfaces. Utilizing a TECA thermoelectric cold plate as a component within the freeze tape caster ensures the manufacturing process remains environmentally friendly. Peltier cold plates use no freon, coolants, or chemicals of any kind. In this example, the customer has slightly modified a commercially-available, off-the-shelf (COTS) TECA cold plate to reach the desired -10C set point.

Read moreFreeze Tape Casting

CONDENSING VAPOR

Condensing Vapor: AHP-470CP in Laboratory Reactor Instrumentation

condensing vapor   cooling vapor stream

In a chemical process (catalysis), the customer uses several TECA Model AHP-470CP Cold Plates to condense methanol out of a vapor stream and collect liquid in the 100 mL glass vessels shown. The AHP-470CP offers a convenient small size and is customizable to the end user’s needs.

Please see the “Options” section on the product data sheet to learn more.

Equipment Testing & Maintenance

Equipment testing and maintenance:

Equipment Testing & Maintenance  Electronics Testing & Maintenance

Three AHP-1200CPV Cold Plates are running continuously and in tandem at 17 °C to monitor satellite equipment. The customer has added air deflectors of his own design. TECA offers standard air deflectors as well. The customer applies approximately 50 watts of heat to the cold plate.

THERMAL PREFERENCE TEST

Thermal Preference Test:

thermal preference

Pain Research

Using TECA’s Dual Cold/Hot Plate, a health psychology lab in a large university is conducting a study on the relationship between pain sensitivity and inflammation in human subjects.

The human subject places his or her hand on the surface of TECA’s AHP-1200DCP Dual Cold/Hot Plate for a period of time. Researchers are using set points between 52 °C and -4 °C and can utilize the included communications software to program ramp and soak profiles.

TEMPERATURE PREFERENCE TEST

Temperature Preference Test:

temperature preference

TECA’s model AHP-1200DCP consists of two adjacent thermoelectric heat/cool plates (dual zone cold plate).

In this example, the customer has added an optional Plexiglas barrier that allows the rat to easily move between the two surfaces. One plate was set at 30 ºC and the other plate was alternately set also to 30 ºC or to a different temperature. Animals spent time on each plate.

The customer studies whether rats/mice exhibit a significant, temperature-dependent avoidance of plates after injection of analgesic drugs.

Page 1 of 7
1 2 3 7
Quarterly eNewsletter