The customer makes fiber optics and related components and subsystems, they use an AHP-1200CPV cold plate for testing components.
They are using it to run temperature test on them, they set the temperature, and it goes to temperature and sits there, heating or cooling.
“It works well”. Before they were cobbling together home brew solutions with a heater here, a circuit and a fan there but it’s nice to have a system that does it all.
An oil refinery runs tests on asphalt samples at different temperatures.
TECA Model AHP-301CPV Cold Plate is currently being used during the course of the customer’s testing.
The customer says, “We have used this unit at different temperatures, and it has performed well. Thank you for your follow-up on the performance of this device.”
The customer makes high performance crystal oscillators and atomic clocks for satellites and laboratories and they needed something for temperature control and stabilization.
They found TECA and the AHP-301CPV, tried one and say it is “working fantastic”. Well enough to order more for production, quality and engineering tests. They use them to maintain a stable temperature of the oscillator which in turn provides a stable frequency.
Here’s an application that our engineering crew would love to put into greater use if they could figure out where and how. A specialty gas company called. They wanted to transfer toxic and corrosive liquids from big to small containers for lab use. The process had been taking several minutes with too much wasted product.
They knew because of the conditions a natural head pressure in the big container that they could use a cold plate to cool at the receiving vessel (Ø 1.5″ x 12″ bottle) to create a driving force which moves the fluid.
We didn’t go into the physics of this, we trusted what the customer said and worked with them. When they tried an AHP-1200CP it was fantastic. It turned 4 minutes and a lot of waste into no waste and 40 seconds.
Customer needed to test low-temperature performance of inertial measuring devices. In this application of low temperature thermoelectric cooling; the user is testing inertial measurement devices over a temperature range.
The devices as well as the TECA cascaded cooling assembly are subjected to various rotational and acceleration stimuli while device temperature is controlled. The custom thermoelectric cold plate cascaded (Peltier cascade) was built up from a standard Model AHP-301CP cold plate.
The finished test fixture was able to function with a maximum rotation rate of 1700° per second and 50 g acceleration. The rotation is evident in the photo. By using a standard product as the basis for the cooling system, higher costs associated with a custom solution were avoided.
A research lab in Europe needed to stabilize the temperature of an acid solution within +-0.5 °C. TECA’s AHP-301CPV Cold/Hot Plate was the ideal solution due to its small footprint, versatile features and programmable temperature controller. The customer offered the following comments:
TECA’s cold/hot plates are not specifically designed for clean room use however the customer determined this product would be suitable given the restrictions in this particular clean room.
Keeping medication at optimal storage temperature is very important.
A customized AHP-1200CPV thermoelectric cold plate (Peltier cooling plate) with plate that has grooves with various diameters to accommodate vials of different sizes and lengths was a perfect solution for the customer. Another feature of this custom thermoelectric cooling unit (Peltier cold plate) is tamper proof temperature controller.
Stock thermostated sample tray supplied with mass spectrometer holds water samples at above ambient temperature. This leads to evaporation and condensation within the sample vials, and problems of gas transfer through sample needle to mass spectrometer (liquid condensation blocks gas flow through capillary tube).
USF Geology Stable Isotope Laboratory installed a second auto-sampler with a TECA AHP-1200CPV cold plate to keep samples at precisely controlled temperatures to prevent condensation and evaporation of the sample within the vials, and maintains the thermal stability required for isotope ratio mass spectrometry of water samples analyzed by equilibration method.
A private biopharmaceutical company formulates drugs that are sensitive to temperature. TECA Model AHP-1200 CPV is their perfect benchtop cooling solution. The customer uses the AHP-1200 CPV Cold Plate in combination with the customer’s own aluminum blocks to keep solutions at 0C during filtration and vial filling operations.
The customer reports, “We have been very satisfied”. This customer provided photo is a wonderful example of the versatility of TECA’s line of Laboratory Cold/Hot Plates. The plate surfaces are appropriately sized to accept microtiter plates and other lab accessories. The temperature can be read from either the plate surface or anywhere a remote sensor can be placed, via the Remote Sensibility™ feature.
Customer wafers needed cooling at the end of processing and the feet brought the cold plate up to the perfect height to match the production mechanisms. Just a little option that TECA is ready to provide to make the products we build work for you.