Afshin, Author at thermoelectric

Internal Mount a New Option for Air Conditioners

July 22, 2016October 6, 2015 by Afshin

When enclosure cooling is needed but space requirements do not allow for an air conditioner to be protruding outside of the enclosure, TECA has a line of “Internal Mount” coolers to do the job. Five new air conditioner series offer horizontal or vertical mounting internal to the enclosure. Performance rating range from 155 BTU/hr to 390 BTU/hr. As with all TECA air conditioners, versions for temperature control and different environment ratings are available. There are no refrigerants or compressors and no moving parts other than the fans. Thermoelectric cooling is reliable and nearly maintenance free, making these new enclosure coolers the perfect solution for remote or hard to access areas.

RLC-900 & RLC-1800 Liquid Chillers Redesigned

July 22, 2016August 25, 2015 by Afshin

Rack Mounted Liquid Chiller Models RLC-900 and RLC-1800 are newly redesigned. The water fittings are now in the front as well as the back with the convenience of the end user in mind. Whether the chillers are mounted internally or externally, the user can access water inlet and outlet hoses from either end of the chiller. This can help save space, makes the chiller easier to use and increases the versatility of the product.

New PWM Temperature Controller for AHP-1200CPV Cold/Hot Plate:

July 22, 2016June 19, 2015 by Afshin

Models AHP-1200CPV Cold/Hot Plate and AHP-1200CAS Cascaded Cold/Hot Plate were updated with a new PWM temperature controller. The new temperature controller is a Pulse Width Modulating (PWM) controller. It includes fan speed control which enables AHP-1200CPV / AHP-1200CAS to slow the fan automatically, reducing noise, as the unit reaches its set point. Another added benefit is that there are now four independent PID settings for different temperature ranges. USB communication port is included and Labview VI examples are available.

New PWM Temperature Controller for AHP-301CPV Cold/Hot Plate:

July 22, 2016May 7, 2015 by Afshin

Recently, the AHP-301CPV Versatile Cold/Hot Plate was updated with a new PWM temperature controller. The new temperature controller is a Pulse Width Modulating (PWM) controller. It includes fan speed control which enables the AHP-301CPV to slow the fan automatically, reducing noise, as the unit reaches its set point. Another added benefit is that there are now four independent PID settings for different temperature ranges. USB communication port is included and Labview VI examples are available.

Low Maintenance Cooling Just Got Easier:

July 19, 2016December 10, 2014 by Afshin

Across industries, TECA’s reliable thermoelectric coolers are the low maintenance choice for remote and hard to access areas. TECA air conditioners only ever need occasional cleaning of dust or debris off the external heat sink fins. Now, accessing the heat sink is even simpler with our innovative Pivot Clean design. The end user can simply open the external housing without having to remove it from the air conditioner. TECA air conditioners with Pivot Clean are available for NEMA-12, NEMA-4/4X, NEMA-4X/Harsh Environment and CID2 enclosures. Cooling capacities with Pivot Clean range from 200 to 1100 BTU/hr.

Industrial Heating and Cooling Plates

July 20, 2016September 20, 2014 by Afshin

Three new families of solid state cold plate coolers offer the largest standard selection of high efficiency and high performance in the same compact size available. TECA’s newest thermoelectric cold plate products continue to provide reliable and maintenance free direct contact heating and cooling for general use in many industrial and OEM applications. No matter if it’s high delta T, high capacity or high efficiency cooling plates, these new products should meet your varied needs.

Compact Cold Plate Cools and Heats

July 20, 2016July 12, 2014 by Afshin

TECA’s newest cold plates are compact and mount in any orientation. The AHP-250CP and AHP-270CP Cold Plate Models offer 46 watts and 64 watts of cooling, respectively. Each has a generous cold plate surface of 3.5 x 4.5 inches, offering more cooling for its size than similar products. Suitable for compact spaces in industrial, OEM and other applications, these cold plates are low in vibration and noise and have a small profile. Dimensions of the AHP-250CP and AHP-270CP cold plates are the same: 6 x 4.75 x 4.4 inches and the weight of each only 3.8 pounds.

Compact Cold Plate Cools and Heats

July 20, 2016June 16, 2014 by Afshin

AHP-6253: New 3-Phase Thermoelectric Air Conditioner

July 20, 2016May 5, 2014 by Afshin

Protect electronics and keep enclosures cool with the newest member of TECA’s AHP-6200 Series air conditioners. The AHP-6253 Model is a 5,115 BTU/hr air conditioner for systems with 3-phase power. TECA’s new 3-phase industrial air conditioners offer enclosure cooling with high performance and high efficiency. The AHP-6253 includes the energy saving Eco-Mode which uses 73% less energy than the active mode.

FHP-6253 and FHP-6263 3 Phase Space Saving Thermoelectric Air Conditioners

July 20, 2016April 12, 2014 by Afshin

Save space, energy and get more cooling with TECA’s newly introduced FHP-6253 and FHP-6263 thermoelectric air conditioners. For enclosures with limited space, flush-mounted air conditioners offer cooling without physical intrusion into the enclosure. The FHP-6253 and FHP-6263 Models offer the most cooling to date within TECA’s current collection of flush-mounted energy saving air conditioner/heat exchanger products, with performance ratings up to 4,970 BTU/hr. Both models include the energy saving Eco-Mode which uses up to 86% less energy than the active mode.