Afshin TECA Corporation’s TLC-900 Bench Top Liquid Chiller has been upgraded with a Pulse Width Modulating (PWM) controller incorporating four PID temperature ranges for improved temperature control over a wide temperature range. USB communications, operational and data logging software are standard. A new more physically rugged design lends the product increased durability for a wider variety of application environments.
 |
 |
When enclosure cooling is needed but space requirements do not allow for an air conditioner to be protruding outside of the enclosure, TECA has a line of “Internal Mount” coolers to do the job. Five new air conditioner series offer horizontal or vertical mounting internal to the enclosure. Performance rating range from 155 BTU/hr to 390 BTU/hr. As with all TECA air conditioners, versions for temperature control and different environment ratings are available. There are no refrigerants or compressors and no moving parts other than the fans. Thermoelectric cooling is reliable and nearly maintenance free, making these new enclosure coolers the perfect solution for remote or hard to access areas.
Rack Mounted Liquid Chiller Models RLC-900 and RLC-1800 are newly redesigned. The water fittings are now in the front as well as the back with the convenience of the end user in mind. Whether the chillers are mounted internally or externally, the user can access water inlet and outlet hoses from either end of the chiller. This can help save space, makes the chiller easier to use and increases the versatility of the product.
Models AHP-1200CPV Cold/Hot Plate and AHP-1200CAS Cascaded Cold/Hot Plate were updated with a new PWM temperature controller. The new temperature controller is a Pulse Width Modulating (PWM) controller. It includes fan speed control which enables AHP-1200CPV / AHP-1200CAS to slow the fan automatically, reducing noise, as the unit reaches its set point. Another added benefit is that there are now four independent PID settings for different temperature ranges. USB communication port is included and Labview VI examples are available.
Recently, the AHP-301CPV Versatile Cold/Hot Plate was updated with a new PWM temperature controller. The new temperature controller is a Pulse Width Modulating (PWM) controller. It includes fan speed control which enables the AHP-301CPV to slow the fan automatically, reducing noise, as the unit reaches its set point. Another added benefit is that there are now four independent PID settings for different temperature ranges. USB communication port is included and Labview VI examples are available.
Across industries, TECA’s reliable thermoelectric coolers are the low maintenance choice for remote and hard to access areas. TECA air conditioners only ever need occasional cleaning of dust or debris off the external heat sink fins. Now, accessing the heat sink is even simpler with our innovative Pivot Clean design. The end user can simply open the external housing without having to remove it from the air conditioner. TECA air conditioners with Pivot Clean are available for NEMA-12, NEMA-4/4X, NEMA-4X/Harsh Environment and CID2 enclosures. Cooling capacities with Pivot Clean range from 200 to 1100 BTU/hr.
Three new families of solid state cold plate coolers offer the largest standard selection of high efficiency and high performance in the same compact size available. TECA’s newest thermoelectric cold plate products continue to provide reliable and maintenance free direct contact heating and cooling for general use in many industrial and OEM applications. No matter if it’s high delta T, high capacity or high efficiency cooling plates, these new products should meet your varied needs.
TECA’s newest cold plates are compact and mount in any orientation. The AHP-250CP and AHP-270CP Cold Plate Models offer 46 watts and 64 watts of cooling, respectively. Each has a generous cold plate surface of 3.5 x 4.5 inches, offering more cooling for its size than similar products. Suitable for compact spaces in industrial, OEM and other applications, these cold plates are low in vibration and noise and have a small profile. Dimensions of the AHP-250CP and AHP-270CP cold plates are the same: 6 x 4.75 x 4.4 inches and the weight of each only 3.8 pounds.
TECA’s newest cold plates are compact and mount in any orientation. The AHP-250CP and AHP-270CP Cold Plate Models offer 46 watts and 64 watts of cooling, respectively. Each has a generous cold plate surface of 3.5 x 4.5 inches, offering more cooling for its size than similar products. Suitable for compact spaces in industrial, OEM and other applications, these cold plates are low in vibration and noise and have a small profile. Dimensions of the AHP-250CP and AHP-270CP cold plates are the same: 6 x 4.75 x 4.4 inches and the weight of each only 3.8 pounds.