A branch of the US military had an overheating problem with a high-tech radio inside the wing of a fighter aircraft. TECA developed a custom, high-performance cold plate that withstand the shock, vibration, and G forces created by one of the most technically advanced aircraft.
In order to assure maximum strength with minimum weight, TECA’s Advanced Machining Center machines the finned heat sinks for each cooler from a single blocks of material
Here are pictures of the TLC-900 thermoelectric liquid chiller with LHP-150CP Peltier liquid cooled cold plate set up run in the lab. The “load” is a plate with 10 power resistors mounted to the top and a series of thermocouples measuring the surface of the LHP-150CP’s thermoelectric cold plate.
During the test the power to the resistors is increased in steps with enough time in between for the temperatures to stabilize. Plotting the data resulted in performance curves. The test was made with the load insulated and with the load simply covered.
Later on we used a TLC-900CAS, a version of the TLC-900 made specifically for running and controlling secondary cold plates like the LHP-150CP and ran some step, ramp and soak profiles.