Enclosure Cooling with Universal Input Voltage:
The newly released AHP-3259 Series of thermoelectric air conditioners will automatically accept 90 to 264 VRMS input.
TECA Corporation has introduced a new enclosure cooler series. The AHP-2259 Series of thermoelectric air conditioners features universal input voltage. Designed to run off of 100 to 240 volts AC, the units can be easily utilized anywhere. There is a high-efficiency version which provides 1330 BTU/hr of cooling with a C.O.P. rating of 1.35. For more cooling, the high-capacity version is capable of 1820 BTU/hr (C.O.P. rating is .65). Both versions include the energy-saving ECO-Mode for passive cooling during lower demand times. Heat/Cool or Cool-only configurations are available. End users can specify NEMA-12 or NEMA-4 as well as temperature control options.
Please contact us for guidance in choosing the best unit for your needs.
Coldest Liquid Cooled Plate Updated with PWM Temperature Controller
TECA’s liquid cooled cold/hot plates, the LHP-1200CPV (single stage) and LHP-1200CAS (two and three stage cascade system) are recently updated to include a new PWM temperature controller. It includes fan speed control which enables the Cold/Hot Plates to slow the fans automatically, reducing noise, as the unit reaches its set point. Another added benefit is that there are now four independent PID settings for different temperature ranges. USB communication port is included and Labview VI examples are available.
TECA’s largest cold/hot plates, the AHP-1800CPV (single plate) and AHP-1200DCP (dual plates each with independent temperature control) are recently updated to include a new PWM temperature controller. It includes fan speed control which enables the Cold/Hot Plates to slow the fans automatically, reducing noise, as the unit reaches its set point. Another added benefit is that there are now four independent PID settings for different temperature ranges. USB communication port is included and Labview VI examples are available.
TECA Corporation’s TLC-900 Bench Top Liquid Chiller has been upgraded with a Pulse Width Modulating (PWM) controller incorporating four PID temperature ranges for improved temperature control over a wide temperature range. USB communications, operational and data logging software are standard. A new more physically rugged design lends the product increased durability for a wider variety of application environments.
When enclosure cooling is needed but space requirements do not allow for an air conditioner to be protruding outside of the enclosure, TECA has a line of “Internal Mount” coolers to do the job. Five new air conditioner series offer horizontal or vertical mounting internal to the enclosure. Performance rating range from 155 BTU/hr to 390 BTU/hr. As with all TECA air conditioners, versions for temperature control and different environment ratings are available. There are no refrigerants or compressors and no moving parts other than the fans. Thermoelectric cooling is reliable and nearly maintenance free, making these new enclosure coolers the perfect solution for remote or hard to access areas.
Rack Mounted Liquid Chiller Models RLC-900 and RLC-1800 are newly redesigned. The water fittings are now in the front as well as the back with the convenience of the end user in mind. Whether the chillers are mounted internally or externally, the user can access water inlet and outlet hoses from either end of the chiller. This can help save space, makes the chiller easier to use and increases the versatility of the product.