FLUID DISPENSING

Fluid Dispensing:

fluid dispensing

A leading manufacturer of fluid dispensing systems uses one of our Thermoelectric Cold Plate and Temperature Controller for controlling the fluid temperature of adhesives, sealants, lubricants and other materials in meter, mix and dispensing systems.
Unlike other larger, higher cost and less accurate heating and cooling devices, which use heater cartridges, refrigerant or water to heat and cool, these thermoelectric-effect temperature controllers use the Peltier-Seebeck effect to directly convert electrical voltage to thermal differentials. This effect, which is reversible, either heats or cools fluid materials with precision to the temperature set point. The compact Peltier thermoelectric device, temperature sensor and the temperature control is mounted to a manifold where the fluid passes through to be precisely heated, maintained or cooled.

COOLING FLUID FLOW

Cooling Fluid Flow:

cooling fluid flow cooling fluid flow

Chilling liquids being circulated by a peristaltic pump under ultra-clean conditions. When handling and processing various fluids in laboratory and electronic environments cleanliness is a must. Peristaltic pumps have been developed for the purpose of creating a fluid flow without contacting the fluid itself. TECA developed a liquid chiller to cool fluids, while satisfying the same cleanliness requirements.

The solution, based on our successful cold plate product line, has proven to be versatile and effective. Pictured here is the first prototype of a multiple-pass tube cooler for use with a peristaltic pump. Applications range from laboratory to medical to industrial.

CRYOGENIC FLUID CONTROL

Cryogenic Fluid Control:

cryogenic fluid control cryogenic fluid control

 

Cryogenic fluid is extremely sensitive to temperature and pressure changes within an experimental environment. A custom-modified version of TECA’s LHP-300CPHC Liquid-Cooled Cold Plate is installed as part of a system which allows the customer to closely monitor and control temperature.

The long life expectancy and low maintenance requirements of the LHP-300CPHC offer reliability and convenience to the customer’s long-term research experiment.

COOLING DETECTORS FOR PIPELINE INSPECTION

Cooling Detectors For Pipeline Inspection:

inspected pipeline cooling detectors for pipeline inspection TLC-900 cooling detectors

 

The maintenance supervisor from an inspection company was experiencing over heating of his detectors which are used in his outdoor pipeline inspection process. TECA’s TLC-900 Liquid Chiller was mounted to the back of his truck to aid in cooling two detectors. The components had been close to over heating without the chiller. Using the chiller with 50 feet of hose, the customer obtained a good result, successfully cooling his components down several degrees (Celsius), to a safer and more reliable operating temperature.

The customer has purchased multiple TLC-900 Chillers for the same use in other trucks. With little maintenance required, the TLC-900 has versatile features such as universal input (100-240 VAC), which is helpful in this application as the customer has inspections in Europe and in the USA. The same TLC-900 Chiller can be used in either locale. A PWM temperature controller offers USB communications, programmable ramp & soak profiles, and fan speed control for noise reduction.

Quarterly eNewsletter