GAS CHROMATOGRAPHY SYSTEM

Gas Chromatography System:

Gas Chromatography System
Gas Chromatography System Gas Chromatography System

 

TECA Model AHP-1801XPHC-1 Thermoelectric Air Conditioner is used to enable the safe installation of a gas chromatography system into hazardous locations. Most installations are rated Class 1, Groups C & D, Division II. However in some cases the installations require Group B and/or Group A. TECA’s AHP-1801XPHC-1 maintains the interior of the Process Analyzer Enclosure at a control temperature of around 70o °F.  It meets the various requirements of all the installation environments.

This system is installed in Refining, Petrochemical, Upstream and other applications requiring the aforementioned safety ratings. Controlling the temperature of the equipment enclosure rather than the entire shelter allows for far more economical plant installations even in very cold or very hot environments.

Our customer reports:
“Simply protecting our Process Analyzer Enclosure from direct sunlight and precipitation is enough using the AHP-1801XPHC-1.  The TECA Air Conditioner has plenty of capacity to handle the most demanding environments such as the Texas Gulf Coast and even in Alberta, CA. See the actual plant installation picture where 3 Process Enclosures are shown. The TECA Air Conditioners are clearly evident below each analyzer.  These units have been in operation for more than 2 years without maintenance, without downtime.  This says a lot about the capability and capacity of the TECA product in a tough environment.  And the analyzers have performed flawlessly delivering control quality composition data to the plant process control computer.

High Capacity Thermoelectric Cooling 1700-3410 BTU/HR (500-1000 Watts)

Thermoelectric Air Conditioners with cooling capacity ratings 1,700 to 3,400 BTU/HR (500-1,000 Watts):

Unique thermoelectric thermal protection solutions abound on this page. Some of the products on this page are the only thermoelectric air conditioners of their size on the market and all were designed for cooling large enclosures. Three input voltage choices and two mounting options help provide the configuration right for your application. Contact us at TECA anytime for assistance is choosing a thermoelectric cooling solution. Our thermoelectric devices maintain closed-loop cooling in NEMA-12, 4, 4X and CID2 hazardous environments.

Just as robust and efficient as the rest of our collection, the NEMA-12/4/4X products on this page include power-efficient “Green Zone” styles with low amp draws and the available power-saving “Eco-Mode” feature. Eco-Mode can reduce the need for active cooling and thereby can reduce operation costs of TECA’s efficient thermoelectric cabinet coolers.

High capacity Peltier (thermoelectric) air conditioners from TECA can serve a variety of industries. The products on this page have provided thermal control for R&D in defense and aerospace applications, 3-Phase power areas, harsh oil & gas environments, power generation equipment, control panels, crane control boxes, transportation, and other heat sensitive equipment.

Peltier air conditioners
AHP-2250 Series
1875 Btu/Hr
120 VAC
Through Mounted

thermal control
AHP-3250 Series
2250 Btu/Hr
120 VAC
Through Mounted

defense & aerospaceAHP-4250 Series
2490 Btu/Hr
120 VAC
Through Mounted
power generationFHP-2250 Series
1715 Btu/Hr
120 VAC
Flush Mounted
crane control boxesFHP-3250 Series
1980 Btu/Hr
120 VAC
Flush Mounted
heat sensitive equipmentFHP-4250 Series
2410 Btu/Hr
120 VAC
Flush Mounted

electrical cabinet coolers
AHP-2252 Series
2060 Btu/Hr
240 VAC
Through Mounted

C1D2 air conditioners
AHP-3252 Series
2610 Btu/Hr
240 VAC
Through Mounted

panel coolers
AHP-4252 Series
2780 Btu/Hr
240 VAC
Through Mounted
mobile box coolers
FHP-2252 Series
1875 Btu/Hr
240 VAC
Flush Mounted
large kiosk coolers
FHP-3252 Series
2290 Btu/Hr
240 VAC
Flush Mounted
thermoelectric enclosure coolersFHP-4252 Series
2615 Btu/Hr
240 VAC
Flush Mounted

3 phase air conditioners
AHP-3254 Series
2685 Btu/Hr
208 VAC, 3 Phase Wye
Through Mounted

3 phase cabinet coolers
AHP-3253 Series
2970 Btu/Hr
240 VAC, 3 Phase Delta
Through Mounted
class 1 division 2 air conditioners
FHP-3254 Series
2235 Btu/Hr
208 VAC, 3 Phase Wye
Flush Mounted
haz loc cabinet coolers
FHP-3253 Series
2590 Btu/Hr
240 VAC, 3 Phase Delta
Flush Mounted
thermoelectric air conditioners
AHP-2259 Series
1820 Btu/Hr
100-240 VAC
Through Mounted
AHP-3259 Series
2400 Btu/Hr
100-240 VAC
Through Mounted
FHP-3259 Series
2200 Btu/Hr
100-240 VAC
Flush Mounted

FHP-4259 Series

3270 Btu/Hr
100-240 VAC
Flush Mounted

 

Protect your investment with reliable and low maintenance Peltier (thermoelectric) coolers. The solid-state construction is the perfect low-maintenance solution for hard-to-access areas. There are no filters to change and no moving parts except for the fans. Our air conditioners use robust thermoelectric modules and boast a long service life.

Our Sizing Software is available for you to download. Or, call the TECA sales team today for friendly and knowledgeable sizing assistance. We would be glad to hear from you.

Mounting Styles:

AHP - Through Mounted
The through mounted (AHP) enclosure coolers will intrude a few inches into and out of the enclosure

ahp-250-pic-3
FHP - Flush Mounted
The flush mounted (FHP) air conditioners will mount totally external to the enclosure

flush-mounting
IHP - Internal Mounted
The internal mounted (IHP) air conditioners will mount completely internal to the enclosure

IHP-690 install

Resources:

Air conditioner Notes

Applications

Accessories

Manuals

Sizing Software

Contact Us

Quarterly eNewsletter