Harsh

GAS CHROMATOGRAPHY SYSTEM

by

Gas Chromatography System:

Gas Chromatography System
Gas Chromatography System Gas Chromatography System

 

TECA Model AHP-1801XPHC-1 Thermoelectric Air Conditioner is used to enable the safe installation of a gas chromatography system into hazardous locations. Most installations are rated Class 1, Groups C & D, Division II. However in some cases the installations require Group B and/or Group A. TECA’s AHP-1801XPHC-1 maintains the interior of the Process Analyzer Enclosure at a control temperature of around 70o °F.  It meets the various requirements of all the installation environments.

This system is installed in Refining, Petrochemical, Upstream and other applications requiring the aforementioned safety ratings. Controlling the temperature of the equipment enclosure rather than the entire shelter allows for far more economical plant installations even in very cold or very hot environments.

Our customer reports:
“Simply protecting our Process Analyzer Enclosure from direct sunlight and precipitation is enough using the AHP-1801XPHC-1.  The TECA Air Conditioner has plenty of capacity to handle the most demanding environments such as the Texas Gulf Coast and even in Alberta, CA. See the actual plant installation picture where 3 Process Enclosures are shown. The TECA Air Conditioners are clearly evident below each analyzer.  These units have been in operation for more than 2 years without maintenance, without downtime.  This says a lot about the capability and capacity of the TECA product in a tough environment.  And the analyzers have performed flawlessly delivering control quality composition data to the plant process control computer.

COMMUNICATIONS

by

Communications, Cooling Battery Bank:

communications communications

 

Maintain the temperature of a battery bank in a Class 1 Division 2 explosion proof environment to power portable communications equipment. A special purpose vehicle manufacturer needed to maintain the temperature of a bank of batteries to maintain maximum performance.

With our recommendation, the customer selected the TECA Model AHP-1800XP, because it is the only NEMA4X air conditioner available off-the-shelf, which is also certified for C1D2 use. The power source was able to meet the requirement of operation in a Class 1 Division 2 explosion proof environment, to support portable communications systems at car racing venues.

HAZARDOUS ENVIRONMENT

by

Hazardous Environment:

hazardous environment

A custom design solution based on a standard thermoelectric air conditioner AHP-1801X was developed to meet European hazardous environment specification (ATEX) for a customer that was in need of such a system in a very short time.

CORROSIVE ENVIRONMENT

by

Corrosive Environment:

corrosive environment corrosive environment

 

The AHP-1802XPHC-2 met the customers need in an application where other similar products could not function due to extreme corrosive environment.

The TECA design team in a short notice was able to provide a solution based on a standard AHP-1800X thermoelectric air conditioner.

KIOSK COOLING

by

Kiosk Thermal Management

Kiosk Cooling:

kiosk cooling kiosk
Kiosk Thermal Management enclosure coolers

 

In the images shown here, TECA Model AHP-1800XE Thermoelectric Air Conditioner is being used successfully to cool electronics in an outdoor kiosk. The desert environment where the kiosk is located sees temperatures upwards of 110 F.

Outdoor kiosks are growing in popularity but typically require more from an active cooling system than their indoor counterparts. Outdoor kiosks have heat generating equipment like LCD screens and computers. In addition, there can be solar loads and high ambient temperatures to contend with. TECA offers many sizes of enclosure coolers for outdoor use, all utilizing low maintenance and reliable thermoelectric cooling technology.

Our customer raves about the results of this TECA-cooled kiosk, “I had not even one maintenance call. During the summer time the surface of the kiosk gets as high as 125 F, and the components were running cooler than the components in our indoor kiosks.”

See TECA’s profile on the Kiosk Industry web site. Contact TECA Sales with your questions today! Phone 773.342.4900

 

MILITARY

by

Military Application:

military

The 2.4 Meter Mobile SATCOM Tactical Terminal (MSTT) is a lightweight, stand alone, trailer-mounted tri-band SATCOM terminal available to support worldwide, quick deployment satellite communications through military and commercial satellites.

It also uses a customized version of the solid state air conditioner AHP-1801X. It was designed and qualified for worldwide operation in tactical military environments.

WIND TURBINE APPLICATION

by

Wind Turbine:

wind turbine

The applications for AHP-1802XE’s are Vestas wind turbines, one located in Greece and one in the south of Japan.

“We are installing sensitive measurement equipment, and need to control the inside temperature of the measurement panel. One panel is in each of the rotors in the hub and the two others are in the nacelles (rotating and non rotating). We have just decided to make the two panels into one in the nacelle (where the panel in not rotating).”

Cooling Variable Frequency Drives

by

Steel Mill Enclosure Cooling:

A major steel company has multiple equipment enclosures, housing 4 variable frequency drives (VFD) each, to control their industrial cranes. The high temperature in the steel mill was causing excessive shutdowns. Compressor-based air conditioners could not survive the electrical enclosures’ harsh ambient environment on the overhead cranes. The only input power available was a widely varying 250 VDC, which complicated things. TECA successfully and affordably customized a flush-mounted (external to enclosure) thermoelectric air conditioner to meet the customer’s needs.

Cooling Variable Frequency Drives   Steel Mill Enclosure Cooling

Read more

COAL ANALYSIS

by

Coal Analysis:

coal analysis

A customer required a constant temperature to keep his detectors working in a coal analysis application. Due to experiencing failures with a competitor’s air conditioner, the customer reached out to TECA.

The solution was TECA’s FHP-1501XEHC Model, a versatile thermoelectric air conditioner offering heating and cooling as well as dual voltage: 120 or 240 VAC input. Built with an industrial grade sealed fan and components, the FHP-1501XEHC is suitable for NEMA-4 enclosures.

AERONAUTICS

by

Aeronautics:

aeronautics

A leading military and aeronautics contractor needed a cooling solution for an enclosure which would be on a high altitude vessel. The system would be exposed to high winds and ambient elements present in the altitude.

Working with the customer; TECA sales and engineering team designed a cooling solution with specific intake and exhaust characteristics along with custom paint and finish process that could withstand the conditions it will be exposed to.

Quarterly eNewsletter