A global leader in developing and manufacturing cochlear implant systems uses the AHP-1200CPV to cool down silicone molds after the curing process so the operators can safely handle the mold. So far the cold plate has been performing perfectly.
Customer uses TECA AHP-1200CPV cold plate for a very accurate temperature control of a transmitter. The temperature of the unit under test is always the same, no matter what power it dissipates.
The thermal control loop works great and there is never a problem going cold or hot or switching power on or off.
An associate professor of Cosmological Physics at a local university traveled to Antarctica for research. TECA’s High-Capacity AHP-1200CPV Cold Plate went along with him! The AHP-1200CPV is being used for testing on a NASA project.
Here’s a step by step of an AHP-1200CAS/CCP-22 Cascade system our engineers were playing with. They took a purple EasySep magnetic nano particle vessel, set it on the cascade, insulated it and then cycled it up and down for kicks. The curve shows the results. Faster times can be achieved by thinning out the plates and building the cascade into the AHP-1200CAS rather than having it as an option.
Talk to TECA engineers if your interested.
A research organization had a problem with overheating of their equipment in a chemical-vapor deposition reactor TECA’s AHP-301CPV Cold Plate cooled the equipment and improved the performance of the customer’s system.
The customer was able to avoid system failures, which allowed the completion of a research project.
A technological university in Asia chose TECA’ s thermoelectric cooling Model AHP-800MSP Magnetic Stirring Cold/Hot Plate to anodize aluminum. The researcher’s process required a temperature of 10 °C.
The AHP-800MSP‘s universal input voltage feature (100-240 VAC) allows it to be used anywhere, making it a perfect, off the shelf choice for our customer in Asia. He wrote to us: “It is quite good. Also the manual is quite clear and quite user-friendly. Thank you.”
Unique to this product is the adjustable nature of many of its features: stir-bar speed, fan speed (for noise reduction), temperature sensing (internal or external) and more.
The AHP-800MSP can even accept beakers of various size by adding optional sleeves. The solid-state thermoelectric construction is low-maintenance. There are no filters to change and no moving parts except for the fans. Our products use robust thermoelectric modules and boast a long service life.
A company specializing in hydrogen fuel cell technology required fast cooling of a fixture. The fixture is bonding multiple thin materials and can be heated up to 100 °C. The fixture needed to be cooled to the point where it could be handled by technicians—within a 5 minute time frame. Using two AHP-1200CP Cold Plates from TECA, the customer has created a system where a heat sink is cooled on one AHP-1200CP Cold Plate while a hot fixture is sandwiched between a second AHP-1200CP Cold Plate and a pre-cooled heat sink.
The customer reports being very happy with the TECA Cold Plates—the system is cooling in about 4 minutes! The AHP-1200CP Cold Plate is an economical, easy to use product when maximum cooling is required, without a temperature controller. 120 VAC, 240 VAC and 24 VDC versions are available.
Here’s another example of an AHP-1200CP thermoelectric cooler plate (Peltier cooler plate) used in a manufacturing station. The adjustable feet provide vertical flexibility in lining up the cold plate with the workstation. Parts slide easily from the hot plate to the work surface to the cold plate.
Department of histology in a major hospital needed a peltier cold plate to freeze tissue samples for examination. The Histology Division of the Department of Pathology places tissue samples from biopsies into a small block and fills it with wax. Several of these samples are then placed on one of the AHP-1200CP thermoelectric cold plates (Peltier cold plates) to “pull the heat” out of the wax so it gets really hard.
The near-frozen samples are then shaved down to the desired section (slice) using a Microtome (in picture). The thin sections are then placed in the water bath to warm up the remaining wax in order to remove it and then place the section on a slide for examination.
A customer heard about TECA’s Thermoelectric Cold Plates through word-of-mouth and placed an order within a week. The AHP-301CP Cold Plate is used in the customer’s 3D printing process. Parts are printed on an aluminum plate which is then set on the AHP-301CP Cold Plate.
As the AHP-301CP Cold Plate cools the aluminum plate, the 3D prints just pop right off of the aluminum plate. The customer is pleased with the performance, ease of use and low purchase price of this basic model.
The AHP-301CP series is replaced by the newer AHP-401CP series.