Here’s another example of an AHP-1200CP thermoelectric cooler plate (Peltier cooler plate) used in a manufacturing station. The adjustable feet provide vertical flexibility in lining up the cold plate with the workstation. Parts slide easily from the hot plate to the work surface to the cold plate.
Department of histology in a major hospital needed a peltier cold plate to freeze tissue samples for examination. The Histology Division of the Department of Pathology places tissue samples from biopsies into a small block and fills it with wax. Several of these samples are then placed on one of the AHP-1200CP thermoelectric cold plates (Peltier cold plates) to “pull the heat” out of the wax so it gets really hard.
The near-frozen samples are then shaved down to the desired section (slice) using a Microtome (in picture). The thin sections are then placed in the water bath to warm up the remaining wax in order to remove it and then place the section on a slide for examination.
A customer heard about TECA’s Thermoelectric Cold Plates through word-of-mouth and placed an order within a week. The AHP-301CP Cold Plate is used in the customer’s 3D printing process. Parts are printed on an aluminum plate which is then set on the AHP-301CP Cold Plate.
As the AHP-301CP Cold Plate cools the aluminum plate, the 3D prints just pop right off of the aluminum plate. The customer is pleased with the performance, ease of use and low purchase price of this basic model.
The AHP-301CP series is replaced by the newer AHP-401CP series.
The customer was looking for a cooling solution for LED chips. With a heat load as high as 45 watts at times, the customer needed to cool the chips quickly. The customer was able to utilize TECA’s Loaner Program and test the AHP-301CP cold plate before purchasing.
Satisfied with the AHP-301CP performance, the customer has since purchased several more and sold them as a part of his total system to his clients.
The AHP-301CP series is replaced by the newer and updated AHP-401CP series.
The WWW brings many to TECA’s door. These particular customer requirements were filled by an AHP-300CP Peltier cold plate. He needed to control the temperature of a 96 well titer plate in a new product design. But he needed just a few things the standard unit didn’t provide and he didn’t need some that it did provide. He wanted a 24 VDC heat cool system with continuous fan operation and a custom tap pattern on the cold plate.
In short order the TECA sales team assigned a preliminary part number, passed the requirements through to engineering and together the first units were modified and shipped. This gave the customer plenty of time to work with the solid state cold plates and refine his requirements into the custom design he uses today.
The AHP-300CP series is now replaced by a newer and more efficient model the AHP-470CP series.
A cascade sandwich is what we called this that day, built using two AHP-300CP cold plates. The customer needed a fairly large mass cycle between two extremes. The mass and size of the load were limiting factors. The pictures and assembly look crude, and it was, but they were also effective.
It was determined that a final design based on standard components would be successful and it was.
The AHP-300CP series is now replaced by a newer and more efficient model the AHP-470CP series.
A Medial Doctor was interested in a Peltier based “Cold Probe” to anesthetize the skin prior to treatment. He wanted an instrument that ran on batteries based around the Otoscope or the Ophthalmoscope with interchangeable heads. It was a medical application, a prototype and a long shot one at that.
He came to TECA with some rather limiting criteria to do a big job considering the load human skin presents. We did our best and gave the good Doctor his cold probe. We designed it, packaged it, powered it and built it. But not many folks really needed it. Not a complete market success but a technical one.
A branch of the US military had an overheating problem with a high-tech radio inside the wing of a fighter aircraft. TECA developed a custom, high-performance cold plate that withstand the shock, vibration, and G forces created by one of the most technically advanced aircraft.
In order to assure maximum strength with minimum weight, TECA’s Advanced Machining Center machines the finned heat sinks for each cooler from a single blocks of material
Portable medicine cooler needed for carrying emergency intravenous solutions, all components must be enclosed within the case. TECA designed a custom thermoelectric (peltier) based cold plate built into a Pelican™ Box.
TECA is developing this product for a new customer. We have taken a standard Pelican™ Box and configured a battery powered thermoelectric cooling system which is installed totally inside. This cooled box is for the purpose of transporting up to 4 liters of emergency intravenous solutions safely.
There are fitted compartments inside as well for transporting other necessary items for patient care. Since nothing is exposed or protruding from the box, our customer has ended up with a good looking and very rugged, functional thermoelectric product.
At a prominent U.S. university, neuroscience research team choose TECA’s economical AHP-270CP Cold Plate.
The customer reports: “We cool a fly to 8 deg Celsius, and also use vacuum to attach it to the device during a brain dissection procedure. Essentially, the cooling is anesthetizing the fly, making it possible to attach the fly to the dissecting chamber in a very precise manner, using a manipulator (also in the picture).” The AHP-270CP is a great solution because it is small, inexpensive and yet offers reliable and effective cooling on the bench top.