OUTDOOR KIOSK COOLING

Outdoor Kiosk Cooling:

outdoor kiosk cooling   Peltier enclosure cooler
TECA Model AHP-1200XE air conditioners cool over 30 outdoor electronic information kiosks in dozens of State Parks in the U.S. Our customer launched the first electronic interpretive information program specifically designed for visitors to a State Park system by implementing the kiosks.

This award-winning project has received significant attention across the country and TECA is proud to be part of it. The AHP-1200XE can be customized to fit your kiosk’s needs.

GAS CHROMATOGRAPHY SYSTEM

Gas Chromatography System:

Gas Chromatography System
Gas Chromatography System Gas Chromatography System

 

TECA Model AHP-1801XPHC-1 Thermoelectric Air Conditioner is used to enable the safe installation of a gas chromatography system into hazardous locations. Most installations are rated Class 1, Groups C & D, Division II. However in some cases the installations require Group B and/or Group A. TECA’s AHP-1801XPHC-1 maintains the interior of the Process Analyzer Enclosure at a control temperature of around 70o °F.  It meets the various requirements of all the installation environments.

This system is installed in Refining, Petrochemical, Upstream and other applications requiring the aforementioned safety ratings. Controlling the temperature of the equipment enclosure rather than the entire shelter allows for far more economical plant installations even in very cold or very hot environments.

Our customer reports:
“Simply protecting our Process Analyzer Enclosure from direct sunlight and precipitation is enough using the AHP-1801XPHC-1.  The TECA Air Conditioner has plenty of capacity to handle the most demanding environments such as the Texas Gulf Coast and even in Alberta, CA. See the actual plant installation picture where 3 Process Enclosures are shown. The TECA Air Conditioners are clearly evident below each analyzer.  These units have been in operation for more than 2 years without maintenance, without downtime.  This says a lot about the capability and capacity of the TECA product in a tough environment.  And the analyzers have performed flawlessly delivering control quality composition data to the plant process control computer.

TIGHT TEMPERATURE CONTROL

Tight Temperature Control Within Small Enclosure:

tight temperature control 172-ahp-301ff

 

A manufacturer of specialty materials required cooling and heating of small enclosures. The system pictured here is used for the mixing of helium and hydrogen with dew point control.

TECA Model AHP-301FFHC is used with a TECA PID temperature controller to regulate the temperature of the enclosure in order to establish the moisture content of the “wet gas”, which is blended with dry gas to fix the dew point by way of the Buck Equation.

The customer is pleased with the results and continues to build more systems using TECA air conditioners and temperature controllers.

the AHP-301FF series is now replaced by newer model the AHP-401 series.

COOLING LARGER ENCLOSURES

Cooling Larger enclosures Than Ever Before:

cooling larger enclosures

A user of the Model AHP-6250 Solid-State Air Conditioner gives a wonderful example of the benefit of TECA’s newly introduced line of high-capacity thermoelectric air conditioners.

Designed to cool larger enclosures than was previously practical with thermoelectric technology, the AHP-6250 is one of the largest models in this group. For example, the enclosure pictured here is about 8 x 6 x 3 feet. The customer is able to achieve large enclosure cooling with a single thermoelectric air conditioner. Thermoelectric cooling is reliable and maintenance free.

TECA’s new high-capacity line has some thoughtful design features, as seen pictured here on the installed AHP-6250. The cold side (internal to enclosure) has a low profile, which translates into less intrusion into the enclosure, giving the user more room for whatever the enclosure is meant to hold. The robust mounting flange, gasket and hardware and centrally located power input contribute to user-friendly installation. Finally, high air-flow fans and high fin-density heat sinks on the cold side maximize performance and minimize condensation. An integral condensate removal system absorbs condensation and transports it to the hot side, where it gets evaporated into the ambient.

HAZARDOUS ENVIRONMENT

Hazardous Environment:

hazardous environment

A custom design solution based on a standard thermoelectric air conditioner AHP-1801X was developed to meet European hazardous environment specification (ATEX) for a customer that was in need of such a system in a very short time.

ROBOTICS

Robotics Application:

robotics

An industrial plant uses robots in its juicing and bottling process. The robots continuously overheat and shut off. The environment is dirty and 240 VAC is the only available input voltage.

TECA’s AHP-1801X Air Conditioner offers dual voltage capability and a rugged hot side fan that can handle NEMA-4X/Harsh Environment and corrosive environments. The customer is able to use the built-in temperature controller to keep his robots at a cool 25 °C.

WIND TURBINE APPLICATION

Wind Turbine:

wind turbine

The applications for AHP-1802XE’s are Vestas wind turbines, one located in Greece and one in the south of Japan.

“We are installing sensitive measurement equipment, and need to control the inside temperature of the measurement panel. One panel is in each of the rotors in the hub and the two others are in the nacelles (rotating and non rotating). We have just decided to make the two panels into one in the nacelle (where the panel in not rotating).”

Intermodal Control Cooling

Intermodal Control Cooling:

intermodal control cooling

Intermodal systems are increasingly upgrading to automate their processes. Where there is automation, there is a need for control cooling. TECA supports automation by protecting crucial electronics in control cabinets. This minimizes process time and maximizes productivity.

In this example, heat-sensitive electronics are installed in truck processing terminals. TECA Model AHP-1800XEHC offers heat and cool modes and keeps the equipment within safe and operable temperatures.

Learn about the growing automation market and other hot topics; subscribe to our Quarterly eNewsletter.

 

LARGE LCD SCREENS

Large LCD Screens:

large LCD screens
large LCD screens
large LCD screens
large LCD screens

 

Specializing primarily in the food and beverage processing industries, one of our longtime customers uses TECA air conditioners in several applications. These include cooling or heating LCD screens, desktop computers, thin clients, and KVM kiosks. The locations of these applications are indoors, outdoors, in cold rooms and baking areas.

TECA’s comprehensive line of air conditioners fit the bills. We offer each model in different configurations according to the customer’s need regarding input voltage, mounting and application environment.

COAL ANALYSIS

Coal Analysis:

coal analysis

A customer required a constant temperature to keep his detectors working in a coal analysis application. Due to experiencing failures with a competitor’s air conditioner, the customer reached out to TECA.

The solution was TECA’s FHP-1501XEHC Model, a versatile thermoelectric air conditioner offering heating and cooling as well as dual voltage: 120 or 240 VAC input. Built with an industrial grade sealed fan and components, the FHP-1501XEHC is suitable for NEMA-4 enclosures.

Quarterly eNewsletter